Golf Simulator Turf

• High quality, ultra-durable nylon turf (Tour Quality)
• No seam
• Tight-woven with a true rolling heavy face weight
• Grain Neutral. Stimp is in the 10-11 range
• Portable (can be rolled up and stored away easily if need be)
• Durable
• Drop-in cups + extraction flags
• Heavy rubber bumpers
• Easily create breaks and contours
• Use indoors or outdoors
• Great for high-traffic situations

The most authentic roll possible in a turf putting green comes down to two main attributes, heavy face weight and final shear cutting.  We provide the highest face weight in the industry.  This means there are less gaps in the weave for the golf ball to fall into during its roll. Our tour-grade turf putting mats keep your golf ball on your intended line better than other turf/woven putting greens.

• 1/2" deep high quality, true-rolling turf putting surface (Tour Turf)
• 4 Standard Drop-in Cups + Extraction Flags: Holes positioned in each corner 12" from each edge
• 1 High-Back Cup to practice extra-firm putts
• U-bumpers (6 heavy rubber bumpers to create a "U" shape on each end of the putting green)
• Hole Plugs will be included, so the holes can be plugged at any time to take a hole out of play. Also includes
• Hole Deepening Shim to deepen the hole to a full 1" deep, or use it to create a break anywhere on the putting surface
• Hole Reduction Insert to reduce the size of the hole for an added challenge

Optional Hitting Turf Includes:

• 3' x 5' Hitting Turf (Country Club Turf)
• 2 Rubber Tees (1 for Driver + 1 for Woods) a standard wooden tee can be inserted into the rubber tee if desired to change tee height

Optional Corner Shims Include:

• 4 Contoured, Hole-Deepening Corner Shims

Qty (2): the break starts 7" from hole

Qty (2): the break starts 3" from hole

• 4 Double Depth Cups to locate each shim under the hole, deepen the hole, and provide break

*Our greens are measured in nominal inches and hand cut, so slight width variation is possible*

The Quality of the Turf

Not all turf is created equal, and ours is the best of the best. Boasting an ultra-tight weave and heavy face weight. This is the truest roll you can get on a turf surface. Grain Neutral with a 10-11 Stimp. 1/2" thick turf, deep enough for your ball to fall into the hole without a ramp.

The Quality of the Accessories

• Drop in Cups + Extraction Flags
• Heavy rubber bumpers
• Hole deepening shim
• Hole reduction insert
• The ability to create breaks and contours (purchase full contour shims here)

Putting Surface Dimensions

Width: 7.5'

Length: Choose between 8' - 18'

Depth: 1/2"

Hitting Turf Dimensions

Hitting Turf: 3' x 5'

Corner Contour Shims Dimensions

Corner Shims: 24" x 24" corner measurement

• Qty (2): the break starts 7" from hole
• Qty (2): the break starts 3" from hole

*Our greens are measured in nominal inches and hand cut, so slight width variation is possible*

Very little assembly required. Just unroll the turf, clip the bumpers to the ends and sides, and install the cups and flags. Cups get installed from the bottom, and have a flange to keep the cup in place.

*Heat Warning Disclaimer* 

Artificial grass melting point is 180 degrees. Reflective surfaces like windows and steel cookware, can create a temperature that artificial grass cannot withstand. If you have windows that are at risk of reflecting onto the putting green, it is advised to cover the green when not in use, or roll the green up when not in use, to prevent the turf from melting due to the extreme reflective heat. Be aware that melting prevention is the buyer's responsibility. 

Please allow up to 2 weeks for a shipment notification of the Simulator Turf!

Fast FedEx Freight Shipping (Free on orders over $100 in the Continental U.S.)!

Cannot ship to PO Boxes, please provide a physical address. Only available to shipping addresses in the Continental U.S.

Current shipping times and full shipping info can be found here